伟德国际betvicror官网威卡WIKA

伟德国际betvicror官网WIKA带开关的压力表DPGS43.100 Differential pressure gauge with switch contacts

时间:2015年02月04日 浏览:
分享到:
伟德国际betvicror官网WIKA带开关的压力表DPGS43.100 Differential pressure gauge with switch contacts

产品编号:

产品型号:

产品材质:

产品价格:

会员价格:

库存数量:

计价单位:人民币

出品公司:

  • 伟德国际betvicror官网WIKA带开关的压力表DPGS43.100 Differential pressure gauge with switch contacts

     

    差分开关接点压力表,
    不锈钢版本,全焊接结构,
    型号DPGS43.1x0

     

    品牌:威卡

     

    差压压力表开关

    不锈钢,全焊接结构

    型号: DPGS43.100

    规格符合数据表: PV 27.05 AC 08.01

    公称通径: 100

    开关:磁性按扣动开关,型号821

    使第一开关操作: (1 )

    第二开关操作:游(2 )

    电气连接:插头侧向

    +6毫巴范围:-10 ...

    最大。静态压力: 2,5栏

    过压保护: 2,5栏

    过程连接: 2 ×1/2 “不扩散核武器条约”女

    接头位置下端安装

    液体阻尼情况下填充:没有填写

    案例:压力井喷盘

    安装法兰/支架表面或管道安装:安装设备,不锈钢

    压力表标准:国际标准(欧洲标准)

    精度等级: 2.5级

    窗口:夹层安全玻璃

    排气压力室/冲洗连接:排气压力室

    介质温度范围:-20 ... +100°C ( -4 ... +212 °F )

    允许的环境温度:-20 ... +60°C

    制造商: *威卡*
    应用

    控制和调节过程值
    植物的监测和切换电路
    对于增加差分压的测量点
    监测和控制泵
    过滤器的监控
    密闭储罐的液位测量

    特殊功能

    差压测量范围从0 ... 16毫巴
    高工作压力(静压)和高过压安全可达40 bar
    也有充满液体的情况下,高动态压力负载或振动
    感性接触的压力表,在危险区域使用的ATEX认证
    PLC应用的压力表,电子触点

    switchGAUGE型号DPGS43.100
    描述

     
    公称尺寸在毫米
    100,160

    精度等级
    1.6( 2.5在0 ... 16 mbar和0 ... 25毫巴)

    量程
    0 ... 16 mbar至0 ... 25巴
    量程范围0 ... 16毫巴:刻度长度约。 180 ∢ °或所有其他同等真空或合并的压力和真空范围

    这些差压计均采用高耐腐蚀的不锈钢,并设有全金属,全焊接的媒体室,以确保长期的密封性(没有弹性体密封元件) 。

    全金属结构和贴身的设计的pressuremeasuring膜是通过高过压安全。凭借其高档次的不锈钢结构和强大的设计,这个压力表面向化学和过程工程应用。它是适用于气体或液体培养基中,并用于腐蚀性环境。量程从0 ... 16 mbar至0 ... 25巴,以满足各种各样的应用程序的要求。

    Differential pressure gauge with switch contacts,
    stainless steel version, all welded construction,
    Models DPGS43.1x0
    Brand : WIKA

    Differential Pressure gauges with switches

    stainless steel, all welded construction

    Model: DPGS43.100

    Specifications according to data sheet: PV 27.05 and AC 08.01

    Nominal size: 100

    switch: magnetic snap action switch, model 821

    first switch operation: makes (1)

    second switch operation: breaks (2)

    Electrical connection: plug sidewise

    Range: -10...+6 mbar

    Max. static pressure: 2,5 bar

    Overpressure safety: 2,5 bar

    Process connection: 2 x 1/2 NPT female

    Connector position: lower mount

    Liquid Damping (case filling): without filling

    Case: with pressure blowout disk

    Mounting Flange/Bracket: mounting device for surface or pipe mounting, stainless steel

    Pressure Gauge Standard: International (standard Europe)

    Accuracy class: class 2.5

    Window: laminated safety glass

    Venting of pressure chamber/flushing connection: venting of pressure chamber

    Temperature range of medium: -20 ... +100 °C (-4 ... +212 °F)

    admissible ambient temperature: -20 ... +60 °C

    Manufacturer : *WIKA*
    Applications

    Control and regulation of process values
    Monitoring of plants and switching of electric circuits
    For measuring points with increased differential overpressure
    Monitoring and control of pumps
    Filter monitoring
    Level measurement in closed tanks

    Special Features

    Differential pressure measuring ranges from 0 … 16 mbar
    High working pressure (static pressure) and high overpressure safety up to 40 bar
    Also available with liquid-filled case for high dynamic pressure loads or vibrations
    Gauges with inductive contacts for use in hazardous areas with ATEX approval
    Gauges with electronic contacts for PLC applications

    switchGAUGE Model DPGS43.100
    Description

     
    Nominal size in mm
    100, 160

    Accuracy class
    1.6 (2.5 at 0 ... 16 mbar and 0 ... 25 mbar)

    Scale ranges
    0 ... 16 mbar to 0 ... 25 bar
    Scale range 0 ... 16 mbar: scale length approx. 180 ∢ ° or all other equivalent vacuum or combined pressure and vacuum ranges

    These differential pressure gauges are made of highly corrosion-resistant stainless steel and feature an all-metal, all-welded media chamber to ensure long-term leaktightness (no elastomer sealing elements).

    A high overpressure safety is achieved by the all-metal construction and the close-fitting design of the pressuremeasuring diaphragm. With its high-grade stainless steel construction and robust design this pressure gauge is geared to chemical and process engineering applications. It is suitable for gaseous or liquid media and also for corrosive environments. Scale ranges from 0 ... 16 mbar to 0 ... 25 bar are available to meet the requirements of a wide variety of applications.